Sierra Wireless RJ-11 Manual

IPG/7700 Hardware Manual SYSTECHC O R P O R A T I O N Document number 80-001099-7 Revision A Created 2010, and Protected Under

Connecting Devices to the IPG 10 DB-25 Pin Number RS-232 Name Direction Signal Function 2 TX I Serial data in, from remote device to IPG 3

Installing the Hardware 11 Figure 2-3 shows a minimal 3-wire cable using only RX (pin 2, data in), TX (pin 3, data out), and GND (pin 5, ground).

Connecting Devices to the IPG 12 Ethernet LAN The IPG may also be connected to your LAN using an Ethernet port. The Cellular interface is typically

Installing the Hardware 13 Starting the IPG When the IPG is powered up, the LEDs indicate the status of the unit and its ports. The following LED

Troubleshooting 15 Chapter 3: Troubleshooting The IPG has several LED indicators: Unit Status, Ports (serial, POS terminal or modem), Cellular and Eth

Cellular/Serial/Terminal/Modem Port LEDs 16 Cellular/Serial/Terminal/Modem Port LEDs Each port has a Port LED that describes port activity. Table 3

Index 17 Appendix: Specifications IPG Hardware Specifications • ARM7 50MHz CPU • 1MB to 8Mbytes in-circuit boot flash and program memory • 8 to 32

Index 18 Product Dimensions The IPG models measure: 8 inches x 4.75 inches x 1.25 inches (203 mm x 121 mm x 32 mm) Model Numbers Model Terminal Port S

Index 19 Index 1 10/100 Base-TX, cabling specifications, 18 3 3-wire diagram IPG/7000, 10 8 800/1900 MHz, 18 A antenna, 7, 8, 17 asynch port specific

Agency Notifications FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may

Overview 3 Table of Contents CHAPTER 1: OVERVIEW ... 4 IPG Fe

IPG Features 4 Chapter 1: Overview Systech Internet Payment Gateways convert dial-up payment transactions to high-speed IP transactions at the mercha

Overview 5 IPG Features The IPG offers the following features and benefits: • Easy web-based set up and configuration • Open systems communication

Description of IPG-7700 Models 6 Description of IPG-7700 Models The IPG 7700 series is available with a number of different models. These products

Installing the Hardware 7 Chapter 2: Installing the Hardware This chapter describes installing the IPG hardware, including: • Planning the instal

Planning the installation 8 IPG Panel Connectors The following figures show the connectors and LED locations for the IPG models. There are: • zero

Installing the Hardware 9 Connecting Devices to the IPG POS Terminal Port The POS Terminal port is a phone line designed to function just like a s