Sierra Wireless Raven 1x Guia do Utilizador descarregar pdf (Página 27)

Hardware Installation of the Raven XT

Rev 2.0 Mar.10 19

Connecting to a Computer or other

Device

Figure 4-3: USB

Your Raven XT’s full-speed (12 Mbit) USB 2.0 port can be connected directly to

most computers or other devices using a standard full-speed USB 2.0 cable. If the

computer or device you are connecting or the cable is not rated for full-speed, the

modem will communicate at a reduced speed to match. The Raven XT functions

as a device, not a host.

When it is connected to a computer, the USB port should be seen as a COM port

or Ethernet port after the applicable driver is installed.

The Raven XT has a standard mini-B connector.

Warning:

The USB port can only be used in a non-hazardous environment.

Indicator Lights

When solid, Raven XT indicates a successful connection. When your Raven XT is

connected to power and an antenna, there is a specific pattern to the lights to

indicate its operation mode.

Figure 4-4: Raven XT Indicator lights

•Network - Indicates a successful connection to the cellular network with an

IP address given and a channel acquired.

• Signal - Light shows the strength of the signal and may be nearly solid

(strong signal) or flashing (weaker signal). A slow flash indicates a very weak

signal.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 40 41

Sem comentários

Sierra Wireless Raven 1x Guia do Utilizador Página 27